dude, if you didnt recognize Covid restrictions between CO and FL being totally different.. that should tell you how they feel about messing around on the streets. No One Cares!! lol
Why not just add a wheelie bar? You can mold the lead into any shape with a little heat and a hammer, easily. Hammer it flat as you need or as long as you need to spread the weight out along the front end. Think creatively like maybe a led lined bumper? Finders? there is a lot of holes in the uni-body to mold lead into.
hey guys not to be a killjoy that was all fun and games in the beginning spinning stuff on the drill press. A real word of caution. I tried to use an unbalanced bit extender for a Milling bit in my drill press. It was 6 in. At high speed it became a right-angled finger remover. Fortunately it clipped my wrist the area just below my thumb but it was less than an inch away from an artery. In the end the wound was extremely minor but the potential was huge. If you're going to play around like that keep the speed slow. At high speeds don't mess around.
I think T-Bell might've broken the mr2. My aunt broke an axle and transfer case in a land cruiser at the Bell one time... Something about Toyotas maybe
dam kyle lives super fucking close to me lol didnt expect that actually pretty cool but now i gotta change my clutch cuz the stock one let go on me while tuning lol
like i said in the last video CHECK THE CASTER. More positive caster means more toe out and more negative camber. That sub frame the caster arm bolts through and goes to the lower A-arm is the caster.. that sub frame has been pushed back thus more positive caster..
Was for the streets but took it to the track channel got big🙄 Street over track reason why I watch the channel really miss that civic on the street take us back
i work at a tire shop and can get them off and on in well under a minute 5 years of experience lol you still got it sucks going home smelling like tires though right ?
Been saying for a while now in a lot of the videos with the MR2 getting faster and them big old wheelies that you're going to need a wheelie bar but now I'm going to add to it you might need some beadlockers in the back keep them slicks from moving around.
Bro love the car just take a min and just fab a simple wheelie bar for the mr2 before going back to the track it'll take one day ease of mind dont let doing wheelies be the next jumper box (get a new battery for the mr2 also lol)
Kyle talking about the vibe being different In Florida in contrast to how people in Colorado accept the car scene. Welcome to a conservative state as opposed to some liberal shit hole.
miss the street rips
Don’t set the parachute on fire 😂
Mr2 is my dream car
I still remember the massive wheelie when y'all were in Tucson az
You should of used James's toolbox that would of kept the front end down lol
Real builds 👨🔧😤 real time
U need to caint the paige
Need to some real street racing with it. The mr2 would be nasty from a dig
Man, that thing is bad ass
He looks so much like heath ledger looool
Autotech engineering in riverside California makes the best alternators
what happened to amaelio?
Emilio has his own channel now: Emilio's World
Damn i miss the sound of a stock moto... gave me goosebumps thinking of my old Karting days.
does it make it through the drive thru in 8 seconds flat DAT service
7:52....is your "Meanwhile, back at the Bat Cave...." Moment.
yooo you guys nearly have 1mill!! i been following since like 50k boys!!
They probably get $500 every time they say Taco Bell lol. I counted at least 8 times. New drinking game.
Some no prep action would be awesome!!
that is a nice car 😎👌👍👍👍
I would love a private road to taco Bell 😍
Test road on a public place lol states has awesome perks!
dude, if you didnt recognize Covid restrictions between CO and FL being totally different.. that should tell you how they feel about messing around on the streets. No One Cares!! lol
Your MR2 is dope 💪🏻💪🏻
Keep up the great videos
Why not just add a wheelie bar? You can mold the lead into any shape with a little heat and a hammer, easily. Hammer it flat as you need or as long as you need to spread the weight out along the front end. Think creatively like maybe a led lined bumper? Finders? there is a lot of holes in the uni-body to mold lead into.
Bring Wyatt truck into the show it deserves it haha.
bruh did anybody notice his voice was speed up at the end of the tire change hahaha kyle out here cheatin
Sure got a busy test track, hope your charging everyone except the fire support personnel..... LOL.. Keep up the good work you guys..
Random point, it always concerns me to see exhaust shooting out Flames so close to the parachute. Have you ever thought about that?
hey guys not to be a killjoy that was all fun and games in the beginning spinning stuff on the drill press. A real word of caution. I tried to use an unbalanced bit extender for a Milling bit in my drill press. It was 6 in. At high speed it became a right-angled finger remover. Fortunately it clipped my wrist the area just below my thumb but it was less than an inch away from an artery. In the end the wound was extremely minor but the potential was huge. If you're going to play around like that keep the speed slow. At high speeds don't mess around.
I think T-Bell might've broken the mr2. My aunt broke an axle and transfer case in a land cruiser at the Bell one time... Something about Toyotas maybe
"We originally built this thing to tear down the streets, but the channel got big" damn I had a feeling. Smart choice haha.
Toll money is good these days
I bet you had a lot of times at the tire shop being mad about being at the tire shop, somehow those times make the best memories!
Mexico is where we always go, pretty soon we will start uploading some videos in 2021 lol 💯👍👍👍🇵🇷
Karting is so sick, i have an 175cc Iame. The G forces are insane
Gotta get the hell yeahs on them
dam kyle lives super fucking close to me lol didnt expect that actually pretty cool but now i gotta change my clutch cuz the stock one let go on me while tuning lol
why was the rear tyre change speed up ?
No More adds
Cut the adds mmm FRICK
So many adds makes me and my friends want to unsubscribe took me like a hour to watch 20 minute video 🤦♂️🤦♂️
why?
will Kyle ever get a steering wheel for the mr2 or does he just prefer the stock one?
Upload more often not once a week you tool 😅🤣😅🤣🤣
Mario kart “boostedboii” edition 😁 it’s a meee Emilio!
Still have nothing on us aussies 😂😂😂😂😂😂
Bring back the jet engine scooter please.
God i love 2 strokes
They have a yellow brick road to taco bell.
AND ADD EXTRA WEIGHT ACCOUNT FOR THE SMALLER TIRES.. may only be 10lbs total but thats alot trust me..
like i said in the last video CHECK THE CASTER. More positive caster means more toe out and more negative camber. That sub frame the caster arm bolts through and goes to the lower A-arm is the caster.. that sub frame has been pushed back thus more positive caster..
Does anyone know if they touched a 1.5 turbo civic yet?!?!
ROTARY SWAP THE SUSUCKMI
Would a front splitter help with the downforce for the front end
Need the hell yeah brother on the rears
Florida looks like fun. Melbourne Australia is policed to the point of a nanny state.
This is the best combination ever let your boy fix everything no more half-ass BS! But we love your mind 100% good job!!!
You forgot to rebuild your sensor
Honda life swap everything with a Honda motor lol love the videos
I mean it's florida.....they have bigger fish to fry than someone driving a race car with a passenger in no seat.
Man Kyle that 24 looks so much better than that old 26 makes it look faster lol
In colorado we use to get more content then florida life 🤔 i thought that was the idea of being in florida
Who wants to see a street wheelie from a stop light. ✋🏻
Wyatt is the best thing that had happened to this channel forsure.
Nobody Kyle: “The ol’ Kater Tart”
Love the mr2 🤘
I dont know how I haven't ran into on the street yet. I'm around your area all the time and recognize all the streets your on in the videos.
Let wyatt drive the mr2 lol
Let’s take it on a secret cash days🤑
HELL YEAHHHH BROO
Love the channel. Keep up the great work!
Sence u went with a smaller rim and tire, well that lower the center gravity of the front end a little to help keep the front end down.
Was for the streets but took it to the track channel got big🙄 Street over track reason why I watch the channel really miss that civic on the street take us back
Wonders why all holes drilled in the future are egged out lmao
This one was hilarious 🤣 cheers boyz
work that inner field of freedom factory ya I move to Florida just cuz
Finish what u were saying about working at a tire shop I wanna know 😂
i work at a tire shop and can get them off and on in well under a minute 5 years of experience lol you still got it sucks going home smelling like tires though right ?
Love the content keep it going bro
Been saying for a while now in a lot of the videos with the MR2 getting faster and them big old wheelies that you're going to need a wheelie bar but now I'm going to add to it you might need some beadlockers in the back keep them slicks from moving around.
Where's the baja blast bby!!
Would have been great to mini wheelie for the guy lol Edit: Audio on camera was rough in the car.
you gonna lose top end on a smaller tire?
Kyle, Brother, I laughed SO hard when you said "oh shit" lol
Bro love the car just take a min and just fab a simple wheelie bar for the mr2 before going back to the track it'll take one day ease of mind dont let doing wheelies be the next jumper box (get a new battery for the mr2 also lol)
how many ppl wished you had all of these guy's skills combined? The things we could do.. What WOULD you do with them all lol?
This car needs to go to a no prep event ASAP! I would travel to Florida to watch that lol I’m sure a lot of us fans would!
put the hell yeah brother stencil on the new slicks boiii
15:42 is that a Subuwu? Subaru owners be chill. 💪😏
Kyle talking about the vibe being different In Florida in contrast to how people in Colorado accept the car scene. Welcome to a conservative state as opposed to some liberal shit hole.
I love that hood pin that jermey made lol cool af
No one: Kyle: my first job was actually at a tire shop
Awesome Vid man and I’m so you and all the guys are a team man that’s so great
not putting a wheelie bar turned your mr2 into a bucket
Are you guys going to use the lazers on the front of the car to pull power when the wheels go up?
Add the Wheelie bars, you might not need them but then again.....you probably will. Besides, they will look bad-ass.
It would be so cool to see the mr2 do raceweek next summer
Wyatt is awesome man, he's going to get this fleet of shit boxes flying 🤣
Can we boost my 2015 Camaro? I’m in Florida